Battery For:
Energizer
    
Battery Features:        
  • Composition: Silver Oxide
  • Voltage: 3V
  • Size: 2mm x 16mm
  •        


Note : Used in Watches, Calculators, Small Electronics, Toys, Lasers & Medical Devices Requiring 1.55 Volts Of Power.
 oem battery for energizer cr1620
 oem battery for energizer cr1620

Battery For:
Energizer

Single Pack (5 Batteries)

Condition Type
$11.95
 oem battery for energizer cr1620
 oem battery for energizer cr1620

Battery For:
Energizer

2-Pack (10 Batteries)
($1.99 per Battery)

You Save 17%

Condition Type
$19.90
 oem battery for energizer cr1620
 oem battery for energizer cr1620

Battery For:
Energizer

3-Pack (15 Batteries)
($1.79 per Battery)

You Save 25%

Condition Type
$26.85
 oem battery for energizer cr1620
 oem battery for energizer cr1620

Battery For:
Energizer

6-Pack (30 Batteries)
($1.39 per Battery)

You Save 42%

Condition Type
$41.70







...Compatible with other Car Brands and many more Applications.
Car Key battery Installtion:
Car Key installation PDF Download
1.How to open a key fob:
a. Unscrew the back of the key fob:
Flip the key fob over and look for at least 1 screw holding in the plastic. These screws are tiny, so you will need a small Phillips head screwdriver. Rotate the screw counterclockwise to remove it.
b. Pry the cover off:
Your fob will have a seam around the side edges. This is where the fob’s halves meet. Push the tip of a flat head screwdriver into the seam to separate the halves. Then, lift the screwdriver to pry the cover off.
2. How to replace the battery:
a. Pry the battery out with a screwdriver:
The battery looks like a small, silver coin placed in fob’s center. Try to remove the battery by sliding it out with your fingers. If this doesn’t happen, lift it out with a flat screwdriver. Slide the screwdriver’s head under the battery and gently lift it to remove it.
b. Slide the new battery into place:
Fit the new battery into the slot where the old one was. Normally, the battery fits with the positive side face-up. You won’t need to do anything else to secure it besides fitting it into the battery slot.
3. Test the key fob.
Point the key fob at your car and attempt to use it. It should work right away. If it doesn’t, the battery may be upside-down. You will need to take the fob apart again to test this.